101 ALtracs® Xt – Thread forming in light alloys without tradeoffs entire screw joint. Thus, joint integrity is sacrificed in favor of easier assembly. In contrast, EJOT‘s ALtracs® product family takes a different approach. By combining a circular, fully load-bearing cross-section with a specially optimized 33° thread flank for light alloys, it achieves higher clamp loads and joint integrity comparable to metric screw joints (property class 10.9). Many users have faced a dilemma in the past: Should they prioritize maximum process safety or maximum joint integrity? EJOT‘s latest development, the ALtracs® Xt, puts an end to that dilemma. The “Progressive Forming Profile” at the screw tip limits contact areas between screw and boss material and thus creates low friction during thread forming. Consequently, the load-bearing thread can also enter the female thread with low friction. When combined with the bionically optimized thread flank design, the advantages of both screw concepts can be ideally merged. Additionally, ALtracs® Xt comes with the opportunity of pre-designing the thread forming screw joint via the corresponding calculation software Xt CALC®. This software enables the calculation of all relevant process and joint parameters (e.g. torques, load levels, failure mechanisms). Thus, Xt CALC® allows clamp load oriented design – based on the VDI 2230. Furthermore, EJOT offers a wide range of customized engineering services. With the focus on the influence of the fastener(s) on the complete component, analyses of clamp load relaxation or leak-tightness, among others, are possible. This opens up new horizons in terms of application engineering. Due to the low installation torque in combination with high failure torques, ALtracs® Xt screws can be used very flexibly, even at varying installation depths. This leads to potentials regarding the standardization of screws in the application. The low installation torque, combined with a high stripping torque, results in an exceptionally wide process window, along with a high clamp load and excellent joint integrity. ALtracs® Xt – Optimal performance in terms of process safety and joint integrity! EJOT SE & Co. KG Fastening solutions for Industry & Automotive www.ejot.com/industry Buchtipp Gesunde und erfolgreiche Führung mit der Kraft des Atems In einer Zeit, in der Burnout und Stress in Führungspositionen zunehmen, kann bewusstes Atmen nicht nur die Arbeit, sondern das gesamte Leben positiv beeinflussen. In seinem Buch „Atmen: Der Schlüssel zur erfolgreichen und gesunden Führung“ zeigt Management-Coach und Achtsamkeits-Experte Christoph Glaser, wie sich mit der Kraft des Atems Stress deutlich reduzieren und zudem die Leistungsfähigkeit steigern lässt. Bereits 12 Minuten tägliches Training führen zu mehr Klarheit, Leistungsfähigkeit und Kreativität. Glaser, der derzeit auf Top-Management als Geheimtipp gehandelt wird, stellt in seinem Buch die Technik der atembasierten Achtsamkeit Schritt für Schritt vor. Dabei erzählt er auch von seinen Trainings in 50 Ländern der Welt, von der Schweiz bis Madagaskar, die ihn zu Top-Führungskräften, bis ins Schloss eines Prinzen und zum weltbekannten Lehrer der Meditation Sri Sri Ravi Shankar führten. Mit einem Vorwort von Roland Liebscher-Bracht. Christoph Glaser Atmen Der Schlüssel zur erfolgreichen und gesunden Führung campus Verlag 274 Seiten Hardcover gebunden 28,00 Euro (D) ISBN: 978-3-593-51965-4
RkJQdWJsaXNoZXIy MjUzMzQ=